Wednesday, July 25, 2018
Netgear Router Connected but no Internet Connection: Here’s the Solution
Users often face issues related to their process of NETGEAR Router Setup. Are you facing
the same issues? What does it say? Does it say that you are connected with your
router but still won’t let you access routerlogin.net
or enter into web interface of router login?
 |
| Add caption |
Let’s get started and
troubleshoot this problem
1. Power Cycle to Modem and NETGEAR Router
The essential part of your router and modem is doing a
restart or power cycling. First, restart your modem wait for two minutes and then
restart your Netgear router. Once done with this process, restart all your
devices including computer/ laptop/ tablet, etc in the gap of five minutes.
Now, check the status of the light on your router and the
modem. If you are facing the same issue, try following some below-given points.
·
Update your Netgear Router along with modem to
the latest firmware of technology.
·
Place both of the devices in difference of 20-30
feet with each other.
·
Place your router openly in a cool place. Never
let it be overheated with the load of heavy malicious files.
·
Connect your computer with the router. Type in
the default IP address i.e. 192.168.1.250
into field of the address bar of a web browser. After that, you will be prompt
to enter the default login details into the required fields.
Contact Netgear
Support for further details.
2. Reset NETGEAR Router to Default Details
If the process of power cycling doesn’t work, reset your
Netgear router.
·
Take the help of a paper clip and press the
factory reset hole on the back of your router for one minute.
·
If this process also doesn’t work, place your
router to a different location. The location would be away from interferences
caused due to third-party neighboring devices or household metal appliances.
·
Keep the antennas of your router straight. Be
certain that it wires do not messes with others.
·
Do not place it beneath the cable. Place it on
the higher shelf. Avoid touching the ground.
Don’t panic or frustrate if your router doesn’t work for
you. Just call our tech support team on toll-free number 1-888-829-5515 to make your device up and running with the latest
technology.
3. Configuration and Installation of NETGEAR Wireless
Router
Plug both Netgear router and modem to an electric wall
socket and wait for the LED on your Netgear device start blinking. After that,
connect a computer with it via Ethernet or USB cable.
Note: The public
WiFi supposed to be disabled during the process of configuration. Also, turn
off your microwave, treadmill, baby monitors, security alarms, juicer, cordless
phones and Bluetooth speaker.
4. Switch to a Range Extender
This would be the best way to improve the strength of your
internet connectivity. Nowadays, where technology has reached its high-heights
than why don’t we. The configuration of NETGEARExtender Setup with the existing router would be the best thing ever.
Netgear Firmware: Boost
up your Internet Speed
Router and the extender supposed to be plugged into a wall
socket that has good power supply.
ü
Avoid high-voltage, low-voltage and fluctuation.
The computer/ laptop should be in range of your range
extender.
ü
Avoid interference of third-party WiFi, metal
and electronic devices.
Open a web browser and type mywifiext into field of the address bar.
ü
Clear all the malware, browsing history, cache
and cookies from your PC or laptop.
Enter the default details into the page displayed
ü
The default login credentials shouldn’t be
changed before the process of NETGEAR Extender
Setup. If you face issues while logging into mywifiext.net, then:
·
Exit from the first web browser.
·
Restart your PC/ laptop.
·
Try using another web browser.
·
Call NETGEAR Tech Support team.
Subscribe to:
Post Comments
(
Atom
)
No comments :
Post a Comment